Can be used on ceramic, porcelain, glazed porcelain, coating of ceramic and granite ceramic, floor and surfaces of indoors, floorings of outdoors.
• It can’t be applied on:
• Metal surfaces.
• Exteriors.
• Floor heated and prefab surfaces
• It can be used up to 4 hours.
• It can be worked up to 25 minutes.
• It can be retouched in 20 minutes.
• Joint can be applied after 24 hours (walls and floors)
• Area can be open for traffic after 24 hours. 1 week for areas effected by heavy traffic.
• Applying thickness: Around 3-10 mm thickness. (Single or double-sided bounding)
• While application, surface and environment temperature must be between +5°C and +35°C.
• It must not to be applied to surfaces that are frozen, melting or frost hazard in 24 hours.
• It must not to be applied under direct sunlight, strong wind and hot surfaces.
• Application Care should be taken that Fenix Granipor Flex C2TE does not form a film on the surface, and the film should be made by re-combing that part.
• Surface needs to be dry, clean, and durable. Thin plaster that thicker than 3mm should be cleaned completely via excavation.Multi porous surfaces should be wetted and waited until the water layer is gone so that the surface remains moist.
• Important deformities or holes on surface should be fixed at least 24 hours ago with Fenix Repairing Mortar before Fenix Granipor C2TE application.
•It is recommended to bond with white colored Fenix Granipor Adhesive Mortar for bright colored wall and floor ceramics along with glass bricks.
• Fenix Exposed Concrete Plaster can be used for increase of performance.
• Application usage is to run the entire system with water before it dries.
