Outdoors:
• Cement based plasters,
• Plasterwork,
• Gypsum blocks,
• Plaster Plates (Mixed with plaster).
• Appliable last coat options:
Fenix Elastic Levelling Paste could be left as last layer, ready-made painted plaster, paint and frontal coats.
• Wallpapers also could be in use on indoor applications.
• Ceramic applications could be done with Fenix Granipor Flex on applied areas that thicker than 3 mm.

• Not applicable on exterior with including plaster
• Not applicable with hydraulic binder mortar
• It should be applied without adding cement if synthetic paint applied.

• Prepared mortar should be used in 2 hours if mixed with cement, 30 minutes if mixed with plaster.
• Time between layers that should be waited is 52 hours if mixed with cement (for 1 mm thickness), 72 hours if mixed with plaster (for 2 mm thickness).
• Not applicable if mixed with plaster on exterior.

When mixed with cement; 0,3-0,5 kg When mixed with cement and 1 kg of YN1 Plaster mixed; with 0,1-0,3 kg of plaster and 1 kg of YN1 (water must not be added)
Values are obtained by laboratory experiment, it may be change depending on building site.

• Environment temperature should be between +5°C and +30°C
• Application should be avoided under very hot and humid weather.
Surface needs to be clean, dry and purified from oil. Surface needs to be cleaned with brush if needed, in hot and dry environments surface should be humidified.