It is a water based paint used especially on tennis courts.
Paint that made with pure acrylic and special mixtures and has a great abrasion resistance.
Not applicable on wooden, chipboard plywood and metal surfaces.
Not applicable against negative water pressure.
Not applicable on terraces and drinking water tanks.
It should not be left bare under direct sunlight.
Touching time is 4 hours.
Time should be waited for 12 hours between layers.
Full drying time is 48 hours.
Depending on the absorbency of a single layer surface; 0,300 - 0,350 kg/m²
• Any anti-adhesive materials such as dirt, mold and oil must be cleansed from the surface
• Surface needs to be dry.
• First layer should be thinned with %50 water and be applied as primer coating, second layer should be thinned with %25 water and be applied with a brush or roller.
Environment temperature: between +5 °C and +35 °C.
Cement and sand must be fresh in mixture
Gloves, protective glasses should be wore during application,
eye and skin contact must be avoided.
Fenix Binder 100 Latex should be mixed with clean water.
Fenix Binder 100 Latex’ rate to water is between 1:1 – 1:4
Fenix Binder 100 Latex’ ratio to water depends on special occasions
such as application area.
Prepared liquid mixture should be mixed with dry mixture.
Identified durations are valid in 20 °C floor or environment temperatures, in low temperatures
duration will be longer, in high temperatures duration will be shorter
Dekan Boya ve Yapı Kimyasalları San.Tic.Ltd.Şti. is not responsible for application errors
that may occur if the product is used for purposes other than its intended use or if the
application conditions and recommendations mentioned above are not followed.
