FENIX SK-10 SU KES FIBROUS

It is an acrylic emulsion-based, ready-to-use, elastic, easily applicable to all types of floors, developed for surfaces with a high risk of cracking, fiber-added, application waterproofing material.

Brand	Fenix
Package	Net 20 kg’s of plastic bucket Net 3,5 kg’s of plastic bucket
Consumption	1,5 kg/m² (for 1 mm of application thickness)
Shelf Life	1 year from production date in humid-free and dry areas. If not in use, package must kept closed tightly. Liquid compound should be kept away from frost hazard.
Reference Standards	TS EN 14891 BBayındırlık Poz. No: 04.509 Dispersion-based waterproofing product applied in liquid form type: DM

Contact for order.

Interior and exterior of all buildings; especially in wet areas such as balcony, bathroom, WC
and kitchen. It is applied underneath the ceramic. It is used as an insulation material on
exterior, underneath the paint and coatings.

Cement based screeds, plasters, exposed concretes and plates
Plaster based surfaces (primed with Fenix Exposed Concrete)
Metal surfaces
Contact us for other different surfaces.

It is applied to surfaces that “Fenix SK-10 Su Kes” used with acrylic based paints, exterior coatings and ceramic coating as final coating.

Surface needs to be cleaned of materials that are anti-adhesive such as dust and oil.Surface
needs to be dry, clean, and durable.
Important deformities or holes on surface should be fixed at least 24 hours ago with Fenix
Repairing Mortar before “Fenix SK-10 Su Kes” application.

Not applicable on drinking water stocks.

Density: apprx. 1,49 kg/dm³
Adhesion strength (TS EN 14891) ≥ 1,00 N/mm²
Crack bridging (TS EN 14891) ≥ 2 mm (+20°C)
Capillary water emission (TS EN 1062-3) : ≤ 0,1 kg/(m2h0,5)
Elongation (EN 527-1) ≥ %140 (+23°C)

Time to gain mechanic strength: 7 days.
Time to wait between layers: 6 hours minimum.
Time needed for fully drying: 48 hours.
Application thickness: 1-1,5 mm.

“Fenix SK-10 Su Kes Primer” should be mixed with %40 water.
It should be stirred properly until it becomes homogeneous and then it should be applied to the surface.
After coat of primer dries up, “Fenix SK-10 Su Kes” should be applied for at least 2
layers with pelt roller and brush.
Thin cracks, connection points, corners and edges should be supported with polyester
felt after the first layer coating application
Second layer should be applied vertically to the first one after it dries up.
It should be waited 6 hours between layers.
Specified durations are valid in a surface and environment temperature of 20°C, on low temperatures durations will be longer,
on high temperatures durations will be shorter.

Environment temperature: between +5 °C and +30 °C.
It should not be applied to surfaces that under frost hazard within 24 hours,
frozen and melting
It should not be applied in humid air or under direct sunlight.
Salty water is not applicable.
Foreign materials are definitely not applicable.
Used tools should be cleaned with water after application.
Dekan Boya ve Yapı Kimyasalları San.Tic.Ltd.Şti. is not responsible for application errors
that may occur if the product is used for purposes other than its intended use or if the
application conditions and recommendations mentioned above are not followed.