It is applied to exterior of all buildings and used as protective paint
Outdoors;
Cement based plasters,
Exposed Concrete surfaces (Primed with Fenix Super BT),
Gas Concrete surfaces (Primed with Fenix Super BT)
Old surfaces.
• Paint should be mixed with %20 water. It should be applied with roll after stirred properly for 1. and 2. Layers
• Fenix Super Acryplus should be applied to surface as double coating with a pelt roller and 6 hours should be waited between layers.
• It can’t be applied on horizontal and under 45-degree sloped surfaces.
•It should not be applied under hot or moist weather conditions
6-24 hours will take to dry. (Depends on different weather conditions)
•Environment temperature: between +5 °C and +35 °C
• It should not be applied to surfaces that under frost hazard within 24 hours, frozen and melting
• It should not be applied in strong winds, areas that under direct sunlight or hot surfaces.
• In order to avoid tone differences, products with the same tone number should be used on each facade.
• Salty water must be avoided
• Lime or similar materials should never be added.
• Used tools should be cleansed with water after application
• Application surface needs to be clean, dry, smooth and stable
